60 years focused on metallurgy / mine / water industry pump system

E-mail|Contact US|Chinese|English|Russian

TEL:86-21-59167911
Email:frank@sanlianpump.com

Solid link chemical linked soda water pump project

Date:2017-07-05  Views:1747








Project introduction: 1 million tons/year of the chemical (jiangsu) co., LTD., a circulating water pump for the engineering of hydrating water, vacuum salt circulating water, coal gasification and synthetic ammonia circulating water

Construction unit: compal chemical (jiangsu) co. LTD

Construction address: huaian, jiangsu province.

Delivery medium: fresh water circulating water

Installation site: hydrate, ammonia synthesis and coal gasification, vacuum salt water system pump for outdoor installation

Vacuum salt circulating hot water pump system circulating pump for indoor installation

Circulating water quality: meet the control requirements of technological indicators

Operating conditions: the hydra circulating water system is equipped with 4 circulating pumps (equipped with a variable frequency motor) 3. The pump delivers a normal temperature of 33 to 36. Vacuum evaporation circulating water system configuration circulation cooling water pump 3 (2) equipped with a frequency conversion motor drive is the highest, pumping temperature normal 33 36 and circulating hot water pump 3 (2) equipped with a frequency conversion motor drive is the highest, pumping temperature normal 39 42. Ammonia synthesis and coal gasification circulating water system are equipped with 4 circulating pumps (equipped with a variable frequency motor) 3, and the pumping temperature of 33 is 36.

Project amount: 4.4 million yuan

Project equipment: unlinked water pump hs1000-900-1150a 10,

Coal gasification and ammonia synthesis circulating water pump hs900-800-1000b 4

Vacuum salt circulating pump (cold water pump) hs800-700-850a 3

Vacuum salt circulating pump (hot water pump) hs900-800-1000b 3

Use effect: the pump is used up to now, the running smooth, noise and performance parameters can meet the process and design requirements, energy-saving and efficiency, and easy to repair the replacement parts.