ASP5620 Series Single Stage/Entrifugal Chemicl Mixed Flow Pump

Description

ASP5620 series single stage、centrifugal chemicl mixed flow pump includes horizontal radial section,cantilever type.

The pump is safe,steady operation and easy to maintenance.

The pump is steady in hydraulic performance,high efficiency.

The pump can transmit liquid that is neutral or corrosive with large flow rate,low head,even or has some particles.

Sealing can be packing seal,single、double mechanical seal according to different condition.

Rotation direction:The pump rotates clockwise from the drive end.

Application Area

The pump can transmit liquid that is neutral or corrosive with large flow rate,low head,even or has some particles.

Irrigation and drainage equipment

Cooling water circulation system

City coal gas project

Forced circulation in chemical processing

Salt making and alkali making industry

Performance Range

Capacity: Q ~7000m³/h

Head: H ~25m

Work pressure:P ~1.0Mpa

Work temperature:t -20~140℃

Structural Characteristics

• ASP series mixed flow pump is a “Pull-out”type pump.When examining and dismantling impeller and shaft seal,there is no need to disconnect the pipeline that is connected with the pump casing.Pump shaft is precision machined,and the bearing is thin oil lubrication.There is protective shaft sleeve in the stuffing box cover.The oil in the bearing box can be controlled by a constant oil cup.

• Supporting foot of pump can bear any load coming from pipeline,and pass it to the foundation.Then the rotor can not bend because of the load of bearing to make sure the max. service life of bearing.

• Passing area is so large that it can reduce the blocking.

• Pump with specification 35-40,its outlet&inlet flange dimension complies with HG20592 Standard,pressure rating is 1.0Mpa;for the pump with much larger specification,its pressure rating is 0.6MPa.

• Electric motor or internal combustion engine shall be used as the power drive.

• A whole air bleeder shall be installed on the pump,which shall be good for the exhaust of suction pipe.

• Sealing can be packing seal and double mechanical seal.

Model significance

Sectional Drawing