SP vertical centrifugal slag pump

Product introduction

The SP pump is a vertical centrifugal slurry pump with immersion fluid. Used for conveying various abrasion corrosion slurry, also can be used to pump water. Allows maximum particle diameter 15 mm, the liquid temperature does not exceed 80 ℃ in general. No axial seals are required, and normal work can be performed under insufficient suction. Its overflow components are wear-resistant materials.

Range of application

Applicable to coal, mining, metallurgy, power and other industrial sectors

Model specification

Outlet diameter: DN = 40-200mm (1.5 "-8")

Flow quantity, Q = 12.6-597 m3 / h

Yang cheng: H = 5-34m

Speed: n = 400-2200r/min

Power: P = 1.1-160kw

Structural characteristics 

SP series pump is a vertical centrifugal slurry pump. The pump inlet is vertically down and the outlet is vertical upward on the other side of the pump. Pump is mainly composed of the filter, pump body, impeller, shaft, guard board, bracket and other parts, the upper pump bearing, pump installed in the liquid, don't any shaft seal and flow components adopt wear-resisting material.

Model significance

Sectional Drawing

Range Coverage Chart