60 years focused on metallurgy / mine / water industry pump system

E-mail|Contact US|Chinese|English|Russian

TEL:86-21-59167911
Email:frank@sanlianpump.com

ZS-Type Slurry Pump

Date:2017-05-09  Views:3102


Description

ZS series slurry pump is developed to be of the advanced world level based on 40 years of pump manufacturing and abundant trash pump technology,fully analyzing its different field operation requirements for different industrial applications,introducing the most advanced design theory and collecting the trade talents at home and abroad.

The slurry pump is characterized by its high efficiency,rational structure,high reliability,easy maintenance and low operation cost.It is widely applied to transport slurry containing solid particles in coal,electric power,metallurgy,chemical industry,etc.The maximum volume density for the solid mixed liquids:Cv≤30%,and its weight density is Cw≤60%.The flow passage is wide,and its flow capacity is great.


Application Area

Mines:For the feeding of ferrous and non-ferrous ore pulp and transportation of various concentrate pulp and reject pulp etc.

Metallurgy:For the transportation of various slime in aluminum plant(containing high-temperature slime,≤106℃),and the transportation of various slurry in steel plant.

Coals:For coal exploitation and transportation of various coarse、fine coal slurry(middlings and cleaned coals,etc) for washing.

Electricity:For electrical plant removing ash or ash- flushing,and the transportation of various ashes、mortars,etc.

Construction materials:For the transportation of various sand slurry(For instance,cement mill slime),etc.

Chemical industry:For the transportation of various chemical abrasive and corrosive slime(For example:phosphate fertilizer,potash fertilizer and so on.)

Environmental protection:For stack gas desulfurization and transportation of varous abrasive and corrosive slime.

Hydraulic engineering:For the dredging of pools and waterway,and pumping of sand,grit and clays,etc.


Performance Range

Outlet diameter: DN=25~300mm

Capacity: Q=44~2200m3/h

Head:   H=16~116m

Speed:   n=490、590、740、980、1480r/min

Permissible series connection working pressure: 2MPa

Matched power:P=5.5-800kW 


Structural Characteristics

ZS type slurry pump is horizontal,single stage,single suction,double cantilever shell structure.The pump rotates anticlockwise from the direction of pump inlet.Discharge of pump can rotates 8 different locations to be installed according to 45°interval.

Seal specification:

Packing seal:

For the pump whose head is≤0.5MPa,packing seal shall be chosen.And the packing shall be wear-resisting, impact-resistant carbon fiber packing,with outside clean pressure water to flush,cooling the shaft sleeve,so the slag particle can be prevented into shaft sleeve and packing to prolong the service life of packing seal.When external water pressure is the pressure of pump outlet +0.1MPa,external water flow is 1~2m3/hour,small pump takes small value while big pump takes big value.

Auxiliary impeller+packing seal

For the pump whose head is 0.4MPa≤H≤0.8 MPa,auxiliary impeller and packing seal can be chosen.And the packing shall be wear-resisting, impact-resistant carbon fiber packing,with outside clean pressure water to flush,cooling the shaft sleeve,so the slag particle can be prevented into shaft sleeve and packing to prolong the service life of packing seal.When external water pressure is 0.7 time than the pressure of pump outlet,external water flow is 1~2m3/hour,small pump takes small value while big pump takes big value.


Model significance


Sectional Drawing



Range Coverage Chart